[an error occurred while processing this directive] | Yakko

Yakko


パワフルで自らの道を突き進むYakkoちゃんです(笑)。PentiumPro搭載の98、しかもタワーモデルの98Pro。貴重な存在です。
OSはもちろんWindowsNT。将来的には、我が家のネットワークの中枢機能を
担ってもらおうと思っていますが、只今整備中です。重厚長大なところがあって、
なかなか他の機械と同じ感覚では扱えないところがあるのが辛いところですね。
でも、やっぱり信頼性の必要なサーバには必要充分なspec。早いとこ整備しなきゃ。
 
FreeBSD(98)でのファイルサーバ構築を画策していたものの、なかなか安定しないため、00年11月、Windows2000でファイルサーバを構築しました。30GBのHDDを増設し、うちファイル置き場は20GB。さすがはPentiumPro、Windows2000も快適に動作しています(^^)。
 
01年05月、幻の Pentium II ODP を購入する機会に恵まれたため、取りつけました。PL-Pro/2非対応の450KXチップセット搭載機としては、現状では最高の処理速度を誇るCPUです。今までのPentiumPro 180MHzでも特に不自由しなかったのですが、これで将来的な余裕が持てたのではないでしょうか。
 
2001年後半より、インターネット・サーバとして、localareaでの仮運用開始。OSはもちろん、当時の最新版、FreeBSD(98) 4.3R-Rev01。そして12月より、一部 port を開け、インターネット・サーバ(httpd他)としての試験運用開始。まだ試験運用中とはいえ、かなり安定して動いてくれています。ハード・ソフトそれぞれの安定性の高さ故でしょう。管理者として嬉しいですね(^^)。
 
PC-9821St15 (Yakko) インターネットサーバ
本体NECPC-9821St15/L16PentiumPro 150MHz, 16MB RAM
CPUIntelPentium II ODP 333MHz300MHz動作中
増設メモリNB72pin 32MB wP 8枚計256MB
SCSI/IDECenturyCHB-35INT
E-IDE HDDWestern DigitalWD307AA30GB IDE, 2MB Cache
SCSI HDDCenturyCHB-35INTIDE → SCSI 変換アダプタ

SeagateST-340016AIDE 40GB 7200rpm
SCSI CD-ROMナカミチMJ-4.8sx8 SCSI-2 4連装
ビデオボードI-O DATAGA-PII8/PCIPermedia2 8MB
LAN I/FIntel/富士通i82559 OEMPCI, 10/100BASE-TX
LAN I/FメルコLCI3-TXIMPX EN5038 (RTL8139同等品) PCI, 10/100BASE-TX
USB I/F玄人志向USB2.0PCINEC μPD720100 OHCI/EHCI USB2ポート
サウンドKENWOOD
SOTEC
VH7PCUSB接続サウンドユニット
AM/FMラジオチューナー
USB/SCSIEntrega
(Xircom/Intel)
USB-to-SCSI-Converter
(PGSCSI)
USB1.1 → SCSI-2 (DB25)
SCSI MOI-O DATAMOF-1300/AP128MB〜1.3GB 4,500/3,214rpm
ディスプレイNECPC-TM15115inch, TV機能付き, 共用
SUNCRESTHyper TV Shield FS315inchテレビ用フィルタ
キーボードNECPC-9801-114PC-PTOSキーボード
キーボード
カバー
サンワサプライFA-06
マウスELECOMM-80 Variableバスマウス 100〜800count

OSMicrosoftWindows2000 Professional

Windows 98


Yakko's dmesg - FreeBSD(98) 4.3R-Rev01 (FreeBSD-SA-02:08.exec patched)
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1994-2001 FreeBSD(98) porting team.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #2: Fri Jan 25 10:17:31 JST 2002
    cory@yakko.cory.jp:/usr/src/sys/compile/YAKKO
Timecounter "i8254"  frequency 2457600 Hz
CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (299.88-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1632  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268435456 (262144K bytes)
avail memory = 257384448 (251352K bytes)
Preloaded elf kernel "kernel" at 0xc03e6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03e609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <NEC 0001 PCI to PC-98 C-bus bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <NEC model 0009 PCI to PC-98 Core Graph bridge> at 2.0
ahc0: <Adaptec aic7870 SCSI adapter> port 0x6800-0x68ff mem 0x20000000-0x20000fff irq 3 at device 3.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem 0x20001000-0x200010ff irq 6 at device 8.0 on pci0
rl0: Ethernet address: 00:50:fc:**:**:**
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6100-0x611f mem 0x20100000-0x201fffff,0x20002000-0x20002fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:**:**:**
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 10.0 irq 10
fdc0 at port 0x90-0x97 irq 11 drq 2 on isa0
fd0: <1.44M FDD> on fdc0 drive 0
fd1: <1.44M FDD> on fdc0 drive 1
pckbd0: <PC-98 Keyboard> at port 0x41 irq 1 on isa0
gdc0: <Generic GDC> on isa0
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x200>
sio0 at port 0x30 irq 4 on isa0
sio0: type (internal fifo v-fast)
sio1 at port 0x238-0x23f irq 5 flags 0x12000000 on isa0
sio1: type 16550A
mse0: <Bus/InPort Mouse> at port 0x7fd9,0x7fdb,0x7fdd,0x7fdf irq 13 drq 0 on isa0
ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
snc0: can't assign irq
mss0 at port 0xf40 irq 12 drq 1 on isa0
snd0: <MS Sound System0 (CS4231A)>
mss0: driver is using old-style compatability shims
sysres0: <System resource> on isa0
Waiting 60 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-DJNA -352030 J58O> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 19470MB (39876479 512 byte sectors: 8H 128S/T 38940C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 6 lun 1
cd1: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ahc0 bus 0 target 6 lun 2
cd2: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd2: 10.000MB/s transfers (10.000MHz, offset 15)
cd2: Attempt to query device size failed: NOT READY, Medium not present
cd3 at ahc0 bus 0 target 6 lun 3
cd3: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd3: 10.000MB/s transfers (10.000MHz, offset 15)
cd3: Attempt to query device size failed: NOT READY, Medium not present

Yakko's dmesg - FreeBSD(98) 4.3R-Rev01
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1994-2001 FreeBSD(98) porting team.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #1: Sat Jan 12 02:14:09 JST 2002
    cory@yakko.cory.jp:/usr/src/sys/compile/YAKKO
Timecounter "i8254"  frequency 2457600 Hz
CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (299.88-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1632  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268435456 (262144K bytes)
avail memory = 257384448 (251352K bytes)
Preloaded elf kernel "kernel" at 0xc03e6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03e609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <NEC 0001 PCI to PC-98 C-bus bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <NEC model 0009 PCI to PC-98 Core Graph bridge> at 2.0
ahc0: <Adaptec aic7870 SCSI adapter> port 0x6800-0x68ff mem 0x20000000-0x20000fff irq 3 at device 3.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem 0x20001000-0x200010ff irq 6 at device 8.0 on pci0
rl0: Ethernet address: 00:50:fc:**:**:**
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6100-0x611f mem 0x20100000-0x201fffff,0x20002000-0x20002fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:**:**:**
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 10.0 irq 10
fdc0 at port 0x90-0x97 irq 11 drq 2 on isa0
fd0: <1.44M FDD> on fdc0 drive 0
fd1: <1.44M FDD> on fdc0 drive 1
pckbd0: <PC-98 Keyboard> at port 0x41 irq 1 on isa0
gdc0: <Generic GDC> on isa0
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x200>
sio0 at port 0x30 irq 4 on isa0
sio0: type (internal fifo v-fast)
sio1 at port 0x238-0x23f irq 5 flags 0x12000000 on isa0
sio1: type 16550A
mse0: <Bus/InPort Mouse> at port 0x7fd9,0x7fdb,0x7fdd,0x7fdf irq 13 drq 0 on isa0
ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
snc0: can't assign irq
mss0 at port 0xf40 irq 12 drq 1 on isa0
snd0: <MS Sound System0 (CS4231A)>
mss0: driver is using old-style compatability shims
sysres0: <System resource> on isa0
Waiting 60 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-DJNA -352030 J58O> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 19470MB (39876479 512 byte sectors: 8H 128S/T 38940C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 6 lun 1
cd1: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ahc0 bus 0 target 6 lun 2
cd2: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd2: 10.000MB/s transfers (10.000MHz, offset 15)
cd2: Attempt to query device size failed: NOT READY, Medium not present
cd3 at ahc0 bus 0 target 6 lun 3
cd3: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd3: 10.000MB/s transfers (10.000MHz, offset 15)
cd3: Attempt to query device size failed: NOT READY, Medium not present

Yakko's dmesg - FreeBSD(98) 4.3R-Rev01
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1994-2001 FreeBSD(98) porting team.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Mon Jul 23 01:04:14 JST 2001
    cory@yuakko:/usr/src/sys/compile/YAKKO
Timecounter "i8254"  frequency 2457600 Hz
CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (299.88-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1632  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory  = 268435456 (262144K bytes)
config> di wdc0
No such device: wdc0
Invalid command or syntax.  Type `?' for help.
config> di bs0
No such device: bs0
Invalid command or syntax.  Type `?' for help.
config> en mse0
config> po mse0 0x7fd9
config> ir mse0 13
config> f mse0 0
config> q
avail memory = 257388544 (251356K bytes)
Preloaded elf kernel "kernel" at 0xc03e5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03e509c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <NEC 0001 PCI to PC-98 C-bus bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <NEC model 0009 PCI to PC-98 Core Graph bridge> at 2.0
ahc0: <Adaptec aic7870 SCSI adapter> port 0x6800-0x68ff mem 0x20000000-0x20000ff
f irq 3 at device 3.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
de0: <Digital 21140 Fast Ethernet> port 0x6000-0x607f mem 0x20001000-0x2000107f
irq 6 at device 8.0 on pci0
de0: 21140 [10-100Mb/s] pass 1.2
de0: address 00:a0:b0:**:**:**
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6080-0x609f mem 0x20100000-0x201f
ffff,0x20002000-0x20002fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:**:**:**
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 10.0 irq 10
fdc0 at port 0x90-0x97 irq 11 drq 2 on isa0
fd0: <1.44M FDD> on fdc0 drive 0
fd1: <1.44M FDD> on fdc0 drive 1
pckbd0: <PC-98 Keyboard> at port 0x41 irq 1 on isa0
gdc0: <Generic GDC> on isa0
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x200>
sio0 at port 0x30 irq 4 on isa0
sio0: type (internal fifo v-fast)
sio1 at port 0x238-0x23f irq 5 flags 0x12000000 on isa0
sio1: type 16550A
mse0: <Bus/InPort Mouse> at port 0x7fd9,0x7fdb,0x7fdd,0x7fdf irq 13 drq 0 on isa
0
ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
snc0: can't assign irq
mss0 at port 0xf40 irq 12 drq 1 on isa0
snd0: <MS Sound System0 (CS4231A)>
mss0: driver is using old-style compatability shims
sysres0: <System resource> on isa0
Waiting 60 seconds for SCSI devices to settle
de0: autosense failed: cable problem?
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-DJNA -352030 J58O> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 19470MB (39876479 512 byte sectors: 8H 128S/T 38940C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 6 lun 1
cd1: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ahc0 bus 0 target 6 lun 2
cd2: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd2: 10.000MB/s transfers (10.000MHz, offset 15)
cd2: Attempt to query device size failed: NOT READY, Medium not present
cd3 at ahc0 bus 0 target 6 lun 3
cd3: <NAKAMICH MJ-4.8S 1.05> Removable CD-ROM SCSI-2 device
cd3: 10.000MB/s transfers (10.000MHz, offset 15)
cd3: Attempt to query device size failed: NOT READY, Medium not present

Yakko's dmesg - FreeBSD(98) 4.0R-Rev01

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1994-2000 FreeBSD(98) porting team.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Thu Jun 29 22:36:09 JST 2000
    cory@yakko:/usr/src/sys/compile/YAKKO
Timecounter "i8254"  frequency 2457600 Hz
Timecounter "TSC"  frequency 179929175 Hz
CPU: Pentium Pro (179.93-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 268435456 (262144K bytes)
avail memory = 256434176 (250424K bytes)
Preloaded elf kernel "kernel" at 0xc03d5000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <NEC 0001 PCI to PC-98 C-bus bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <NEC model 0009 PCI to PC-98 Core Graph bridge> at 2.0
ahc0: <Adaptec aic7870 SCSI adapter> port 0x6800-0x68ff mem 0x20000000-0x20000ff
f irq 3 at device 3.0 on pci0
ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0x20001000-0x20001fff irq 6 a
t device 8.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: Adomax Adomax USB Mouse, rev 1.00/0.00, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem 0x20002000-0x200020ff ir
q 9 at device 9.0 on pci0
rl0: Ethernet address: 00:00:21:**:**:**
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: supplying EUI64: 00:00:21:ff:**:**:**:**
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 10.0 irq 10
fdc0 at port 0x90-0x97 irq 11 drq 2 on isa0
fd0: <1.44M FDD> on fdc0 drive 0
fd1: <1.44M FDD> on fdc0 drive 1
fd2: <1M/640K FDD> on fdc0 drive 2
pckbd0: <PC-98 Keyboard> at port 0x41 irq 1 on isa0
kbd0 at pckbd0
gdc0: <Generic GDC> on isa0
sc0: <System console> on isa0
sc0: PC-98x1 <16 virtual consoles, flags=0x200>
sio0 at port 0x30 irq 4 on isa0
sio0: type (internal fifo v-fast)
sio1 at port 0x238 irq 5 flags 0x12000000 on isa0
sio1: type 16550A
mse0 at port 0x7fd9 irq 13 on isa0
mse0: driver is using old-style compatability shims
ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
mss0 at port 0xf40 irq 12 drq 1 on isa0
snd0: <MS Sound System0 (CS4231A)>
mss0: driver is using old-style compatability shims
unknown0: <SDGPif r1.01> at port 0x1000-0x100f on isa0
Waiting 80 seconds for SCSI devices to settle
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM-DHEA -36481 HP6O> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15)
da1: 6197MB (12692735 512 byte sectors: 8H 32S/T 49579C)
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <NAKAMICH MJ-5.16S 1.11> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [334405 x 2048 byte records]
cd1 at ahc0 bus 0 target 6 lun 1
cd1: <NAKAMICH MJ-5.16S 1.11> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: cd present [316731 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST32550N 0021> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2047MB (4194058 512 byte sectors: 8H 32S/T 16382C)
Mounting root from ufs:/dev/da0s1a
rl0: starting DAD for fe80:0001::0200:21ff:****:****
rl0: DAD complete for fe80:0001::0200:21ff:****:**** - no duplicates found
cd2 at ahc0 bus 0 target 6 lun 2
cd2: <NAKAMICH MJ-5.16S 1.11> Removable CD-ROM SCSI-2 device
cd2: 10.000MB/s transfers (10.000MHz, offset 15)
cd2: cd present [299619 x 2048 byte records]
cd3 at ahc0 bus 0 target 6 lun 3
cd3: <NAKAMICH MJ-5.16S 1.11> Removable CD-ROM SCSI-2 device
cd3: 10.000MB/s transfers (10.000MHz, offset 15)
cd3: cd present [321664 x 2048 byte records]
cd4 at ahc0 bus 0 target 6 lun 4
cd4: <NAKAMICH MJ-5.16S 1.11> Removable CD-ROM SCSI-2 device
cd4: 10.000MB/s transfers (10.000MHz, offset 15)
cd4: cd present [272655 x 2048 byte records]


Yakko's benchmark by HDBENCH
 ★ ★ ★  HDBENCH Ver 2.610  ★ ★ ★ 
使用機種   PC-9821St15
Processor  PentiumPro 179.9MHz [GenuineIntel family 6 model 1 step 9] 
解像度     1024x768 65536色(16Bit)  
Display    NEC FullColor Window Accelerator Board X2
Memory     261,688Kbyte
OS         Windows NT 5.0 (Build: 2195) Service Pack 1 
Date       2001/ 5/20  18:45

NEC SV-98/3-B02 PC-9821X-B02/B02L/B09/B10 または Adaptec AHA-294X/AIC-78XX
  IBM-DJNA-352030         J58O
  WDC WD307AA             05.0
  FUJITSU MCD3130SS       0010
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11

  ALL   浮    整    矩    円   Text Scroll DD  Read Write Memory Drive
 9113  9672 13084 18255  2306 21187   473   3  2835  5093 15083  C:10MB


 ★ ★ ★  HDBENCH Ver 2.610  ★ ★ ★ 
使用機種   PC-9821St15
Processor  Pentium II ODP 299.9MHz [GenuineIntel family 16 model 3 step 2] 
解像度     1024x768 65536色(16Bit)  
Display    NEC FullColor Window Accelerator Board X2
Memory     261,688Kbyte
OS         Windows NT 5.0 (Build: 2195) Service Pack 1 
Date       2001/ 5/20  21:29

NEC SV-98/3-B02 PC-9821X-B02/B02L/B09/B10 または Adaptec AHA-294X/AIC-78XX
  IBM-DJNA-352030         J58O
  WDC WD307AA             05.0
  FUJITSU MCD3130SS       0010
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11
  NAKAMICHMJ-5.16S        1.11

  ALL   浮    整    矩    円   Text Scroll DD  Read Write Memory Drive
13992 27148 21826 28494  2761 22968   495   3  2828  5417 24214  C:10MB

[an error occurred while processing this directive] | Yakko

[an error occurred while processing this directive]